Get the IP address of the Chipsee IPC product. To perform SSH debugging on the Chipsee IPC, you must first connect the product to the Internet.Ĭontinue the debugging by follow these steps:

Open XShell and use the session properties as shown on the figure below.

Please reference the How To Connect Board By Serial manual to connect your PC and Chipsee Industrial Computer over a serial cable. You can use RS232_1_TXD, RS232_1_RXD, GND.įollow these steps to perform serial debugging:Ĭonnect your Windows PC to the Chipsee IPC over a serial cable. You can use it to debug directly, and the default user and password is. The debug serial port of Chipsee Industrial Computer is the first RS232 port. You can refer to the RS232/RS485/CAN Connector section under the EPC/PPC-A9-070-C manual to understand the serial ports of the IPC. You can also use other tools such as Putty, Minicom, SecureCRT or any terminal emulation software. In this document, we use Xshell to debug the Chipsee Industrial Computer. In this documentation, all the commands are executed with root user privileges. Xshell or other terminal emulation software Ubuntu 14.04 OS Prebuilt Files Package (from the link above) USB A-A cable (used only if the hardware configured as OTG) USB-to-serial or other serial cable for debugging You need to prepare the Power Adapter by yourself Hardware Requirements ¶

The CS10600F070 product needs a 6V to 36V power adapter. These products: CS10768F097 and CS12800F101 product needs a 12V to 36V power adapter. Power Supply Unit (PSU) with the appropriate voltages, as follows: You will need to prepare the following items before you can start using the Prebuilt Files Package to re-flash the system.

Prebuilt files for the various industrial PCs can be found in the OS Downloads.īelow are the links to the prebuilt files for each industrial PC model. Downloading Images by using the TF card.

Download ubuntu 14.04 to usb